Description: Very clean- school owned PLX1602 amplifierSerial# 050450199This unit was removed from a working environment and is fully functional. Comes well packed and ready to go with AC cord. Watts Stereo Mode (both channels driven)8 ohms 20 Hz-20 kHz 0.03% THD 300W4 ohms 20 Hz-20 kHz 0.05% THD 500W2 ohms 1 kHz 1% THD 800W Watts Bridge Mono Mode16 ohms 20 Hz-20 kHz 0.01% THD:600W8 ohms 20 Hz-20 kHz 0.01% THD:1100W4 ohms 1 kHz 1% THD:1600W Noise (20 Hz-20 kHz): <-1.7 dB Input Sensitivity @ 8 ohms: 1.2 VrmsInput Sensitivity @ 4 ohms: 1.1 Vrms Output Circuitry: AB Power Requirements (1/8 power pink noise @ 4ohms): 10A Distortion (SMPTE-IM) Less than 0.01%Distortion (typical) 20 Hz-20 KHz (10 dB below rated power 1.0 kHz and below full rated power: Less than 0.01% THD Frequency Response: 20 Hz-20 kHz, � 0.2 dB/8 Hz-50 kHz, +0, -3 dB Damping Factor: greater than 500 Input Impedance: 6 K ohms unbalanced, 12 K ohms balancedInput Clipping: 10 Vrms (+22dB) Cooling: Variable-speed fan, rear-to-front air flow Connectors: (each channel) Input: 3-pin XLR and 1/4 in. TRS balanced Output: Neutrik Speakon and touch-proof binding postsAmplifier Protection: Full short circuit, open circuit, thermal, ultrasonic, and protection.Stable into reactive or mismatched loads.Load Protection On/off muting, DC-fault power supply shutdown Dimensions: 19 in. 48.3cm) rack mounting, 3.5 in. (8.9 cm) tall (2 rack spaces), 13.25 in. (33.7 cm) deep (from front mounting rails) Gain: 40x (32 dB) Weight: 21 lbs. (9.5 kg) net
Price: 249.99 USD
Location: Byron, Illinois
End Time: 2024-10-04T12:12:58.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: QSC
Type: Power Amplifier
Audio Inputs: TRS/Audio Jack, XLR
Number of Channels: 2
Color: Black
Number of Inputs: 2
Model: PLX1602
Signal Gain: 32 dB
Audio Outputs: Banana Speaker Jacks, Raw Cable Speaker Jacks, Speakon
Power: 500W @ 4OHM
Number of Outputs: 2
