Description: Sonic Electronix Ebay - NVX VAD8402 Product SKU: 158915 ID: vad8402 Our Store Contact Us About Us Car Audio & Video Car Security & Safety Marine Powersports NVX VAD8402 840W RMS VAD Series Class-D 2-Channel Full-Range Car/Marine/Powersports Amplifier 0 1 2 3 4 Product Details: Marine Certified Full Range Class D 2-Channel Amplifier CEA-2006 Compliant Peak Power Rating: 1680 Watts RMS Power Rating: 4 ohms: 300 watts x 2 chan. 2 ohms: 420 watts x 2 chan. Bridged, 4 ohms: 840 x 1 chan. LED power (blue) and protect (red) indicators Conformal Coated Marine grade circuit board Heavy duty aluminum alloy heat-sink Platinum-plated RCA level inputs Platinum-plated screw terminals Preamp RCA outputs to daisy chain multiple amps 3-way protection circuitry (thermal, overload, and speaker short protection) Selectable crossover modes: FULL / HPF / LPF Variable high-pass filter: 40 - 500 Hz, 12 dB/octave Variable low-pass filter: 40 - 500 Hz, 12 dB/octave Frequency Range : 20 - 20KHz Bass Boost: 0 - +12dB boost @ 45Hz Input Sensitivity: 200mV-6V Total Harmonic Distortion: Fuse Rating: 40A x 2 Power Wire Gauge: 4 AWG Speaker Wire Gauge: 8 AWG Dimensions: 9.2"L x 7.2"W x 2.0"H Authorized Internet Dealer 1-year Manufacturer's Warranty International customers are responsible for any and all customs, import duties, brokerage fees, and taxes. They are not included in the item price or stated shipping charges. Additional shipping fees are required for locations including, but not limited to: PO Boxes, APO/FPO locations, Alaska, Hawaii, Puerto Rico, Guam, Canada and other countries outside the USA. Power Specifications - Full Range Channels RMS Power @ 4 ohms 300 watts x 2 channel RMS Power @ 2 ohms 420 watts x 2 channel RMS Power @ 1 ohm N/A Bridged RMS Power 840 watts x 1 channel Power Specifications - Full Range Channels Peak Power @ 4 ohms 600 watts x 2 channel Peak Power @ 2 ohms 840 watts x 2 channel Peak Power @ 1 ohm N/A Bridged Peak/Max Power 1680 watts x 1 channel Amplifier Specifications Series V Series Amplifier Class D Number of Channels 2-Channel Total Peak Power Output 1680 watts Total RMS Power Output 840 watts Maximum Input Gauge Size 4 AWG Minimum Impedance Unbridged 2 ohms Minimum Impedance Bridged 4 ohms Frequency Response N/A THD at Rated RMS Power 0.3% Speaker Level Inputs No Preamp Outputs 1 pair Built-in Crossover Low-Pass (LP) High-Pass (HP) Full (AP) High-Pass Crossover Frequency 40 - 500 Hz Low-Pass Crossover Frequency 40 - 500 Hz Subsonic Filter N/A Signal-to-Noise Ratio 105 dB Channel Separation N/A Bass Boost 0 - 18 dB Remote bass/level controller No Fuse Rating 40A x 2 Total Fuse Rating 80 Strappable No Sonic Certified Amplifier Yes Amp Bluetooth Connectivity No Hi-Res Certified No Low-Level Input Sensitivity N/A High-Level Input Sensitivity N/A What is in the box? Paperwork User manual User manual WITB: Amplifiers Amplifier Amplifier Mounting screws (4) Mounting screws (4) Allen wrench Allen wrench Other Accessory #1 N/A Other Accessory #2 N/A Other Accessory #3 N/A Other Accessory #4 N/A Other Accessory #5 N/A Warranty Parts Warranty Duration 1 year Labor Warranty Duration 1 year Warranty Provider Manufacturer High Output Alternators 200 Amp High Output Alternator for 2012-2018 Jeep Wrangler 200 Amp High Output Alternator for 2012-2018 Jeep Wrangler NVX VKN2BK Black Handle Stainless Steel Utility Knife NVX Black Handle Stainless Steel Utility Knife You need one and it's only $3.99 Vehicle Specific LOC Adding an Amp to Your Factory Stereo? 31-Band DSP that Retains Factory Features and Integrates Your New Amp with a Simple Plug-n-Play Harness Amplifier Wiring Kits Get the wires you need to properly install and power your car amp. Belva BAK42 Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire Belva BAK42BL Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire Belva BAK42BK Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire Cerwin-Vega CAK42 Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and Speaker Wire InstallBay AK4ANL Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and ANL Fuse Holder Stinger SSK4ANL Complete 4 Gauge Amplifier Wiring Kit with 2 Channel RCA Interconnects & ANL Fuse Holder Stinger SS1200XS Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and Speaker Wire T-Spec V6-RAK4 Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire NVX XAPK4 4 Gauge 100% (OFC) Oxygen Free Copper Amplifier Power Wiring Kit with Speaker Wire Belva BPK4 4 Gauge Premium (CCA) Copper Clad Aluminum Amplifier Power Wiring Kit with Speaker Wire Stinger SK4241 4 Gauge Power Amplifier Installation Kit Stinger SK6241 4 Gauge Power Amplifier Installation Kit Bass Remote Control Control the volume level of your bass and amplifier from the front of the vehicle. Universal Remote Bass Level Control Knob Flush Mount & Universal via RCA. Works with any amp, controls your bass output NVX XBRC Universal Remote Level Bass Control NVX Remote Level Bass Control with Digital Voltmeter Controls bass level and frequency and monitor voltage Factory (OEM) Integration Want to integrate this amplifier into your vehicle, but you don't want to remove the factory stereo? An LOC (Line Out Converter) will help you do exactly that! Keep the factory look and still get the performance you are looking for. NVX XLCA2 2 Channel Line Out Converter with xBOOST NVX XLCA2X 2-Channel Line Out Converter NVX XLOC22X 2-Channel High Voltage Active Line Output Converter with Impedance Matching and Remote Level Control The XLOC22X helps you easily integrate with your factory or aftermarket stereo system Bass Restoration Processors NVX XBBR2 Looking to fine tune the bass in your vehicle? Look no further RCA Interconnects You will need a good set of RCA interconnect cables to connect your amplifier to your head unit. Using high quality cables ensure the best sound possible by reducing unwanted noise interference, providing tight contacts, and utilizing the latest in cable technology. NVX XIV25 V-Series 2-Channel RCA Cable 16.4 ft 2-Channel RCA Audio Interconnect Cable with Twisted Pair Construction Speaker Wire Improve the sound quality by delivering more power when replacing your factory wiring. High quality speaker will maximize your amplifier investment and system performance. NVX XWS1225 12 AWG Speaker Wire 25 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire 12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA) 12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA) Batteries & Isolators Stinger SPP680 680 Amp SPP Series Dry Cell Battery with Protective Steel Case 200 Amp Relay Isolator (BIR200) Great for isolating a second batter making it dedicated to the stereo system 500 Amp Relay Isolator (BIR500) Does not create a voltage drop to the second battery like conventional isolators 80 Amp Relay Isolator (BIR80) Great for isolating a second batter making it dedicated to the stereo system 80 Amp Smart Relay Isolator (XSBI80) Smart isolator - Monitors and auto-charging feature! 200 Amp Smart Relay Isolator (XSBI200) Smart isolator - Monitors and auto-charging feature! 500 Amp Smart Relay Isolator (XSBI500) Smart isolator - Monitors and auto-charging feature! Capacitors Capacitors store energy for the amplifier to use on demand, thereby assisting in the elimination of dimming lights during peak power surges during use. NVX XCAP1F True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block Belva BB1D 1.0 Farad Capacitor with Digital Red Display for up to 1000W Max Installation Tools With our professional install card, you can have your amp installed by a pro near you, or you can purchase tools and do the install yourself. Belva Nine Function Digital Multimeter Perfect for any installation and troubleshooting Six Function Digital Multimeter Perfect for every toolbox Steve Meade Designs IM-SG Impedance Meter / Signal Generator SMD DD-1 Distortion Detector Set your gains like a Pro, accurately and quickly SMD CC-1 Crossover Calibrator This is a must have! Set your crossover frequency like a Pro Installation Accessories Universal Positive/Negative 1/0 or 4 Gauge Battery Terminal Make installation a breeze with the XBTU Accepts 4 gauge or 8-gauge wire ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output No-fail termination and current flow, it helps keep your system protected and running smoothly High Quality Element Resistant AGU Fuse Holder Belva BAGUH2 AGU Fuse Holder 4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder 4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder 4/8 Gauge AGU Fuse Holder 4/8 Gauge AGU Fuse Holder 4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder 4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder Modular Linkable ANL Fuse Block Modular Linkable ANL Fuse Block 4 Pack of 80 Amp Nickel-Plated MANL Fuse Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses 4 Pack of 100 Amp Nickel-Plated MANL Fuse Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses 4 Pack of 150 Amp Nickel-Plated MANL Fuse Mini-ANL (MANL/AFS) 150A Nickel Plated Fuses 2 Pack of 100 Amp Nickel-Plated ANL Fuse ANL 100A Nickel plated for better power transfer 2 Pack of 200 Amp Nickel-Plated ANL Fuse Two fuses per order. High quality 200 Amp ANL Fuses 2 Pack of 300 Amp Nickel-Plated ANL Fuse Two fuses per order. High quality 300 Amp ANL Fuses Gauge Reducer, 4 Gauge Input to 8 Gauge Pin Great for amplifiers that do not accept a large gauge power wire Pair of 4 Gauge Spade Terminals, #8 Opening Spade Terminals ⢠4 Gauge ⢠1 Red & 1 Black ⢠Nickel Plated 4 Gauge Ring Terminals with 3/8" Opening (5 Pieces) 4 Gauge Ring Terminals with 3/8" Opening (5 Pieces) 5 Pack of Black 4 Gauge Ring Terminals 5 Pack of Black 4 Gauge Ring Terminals (4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing (4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing Bluetooth Adapters NVX VUBT2 Universal Bluetooth Audio Receiver NVX XUBT3 Universal Bluetooth Audio Receiver & Volume/Playback Controller Knob Marine Grade Bluetooth Audio Controller/Receiver Marine Grade Bluetooth Audio Controller/Receiver Policies for US and Canadian Customers Returns Shipping Payments Item Specific Return Policy Standard Return Policy Return for refund within: 30 days Return for replacement within: 30 days Standard Return Policy Overview You may return merchandise purchased from Sonic Electronix for a refund or a replacement, provided that the procedures and requirements are followed. All returns require a return merchandise authorization (RMA) number. An RMA number must be issued within 30 calendar days after the date of purchase. An RMA number is valid for 14 calendar days after it is issued. Refunds A processing fee of 10 percent will apply to the value of merchandise returned for a refund. Refunds are applied to the payment method used at the time of purchase 5-10 days after our receipt of the returned merchandise. We will only refund the value of the merchandise returned, not the shipping cost. On items with free shipping returned for a refund, the original shipping cost that we paid the shipping courier will be deducted from your refund. Exchanges If you purchased a product that you wish to exchange for an alternate item, you can return the item for a refund and simply place a new order for the item you desire. We do not apply store credit to your new purchase. If we see a new purchase for equal or greater value of your return, we will waive the 10 percent processing fee. Defective Merchandise Merchandise that is discovered to be defective upon receipt will be replaced. You may also return defective merchandise for a refund; however, a 10 percent processing fee will apply. The processing fee will only apply if you choose to return the merchandise for a refund. No fee will be assessed if we are permitted to resolve the issue by replacing your defective merchandise. Damaged Merchandise All packages are inspected for damage prior to leaving our warehouse. If your merchandise is damaged during shipment by the shipping courier, please contact us immediately as we must be informed within 10 calendar days from the date of receipt for all damage/shipping related claims. Damaged merchandise can be replaced with the same model only. You may also return damaged merchandise for a refund; however, a 10 percent processing fee will apply. The processing fee will only apply if you choose to return the merchandise for a refund. No fee will be assessed if we are permitted to resolve the issue by replacing your damaged merchandise. Return Shipping Return shipping cost (the cost to send merchandise back to our store) is comparable to your cost of driving to any store for returning an item, which is not reimbursable. Therefore, we do not reimburse any return shipping cost. If an item you received is defective, we will definitely replace the item with a new one; however, we do not cover or reimburse the shipping cost for returning defective merchandise back to our store. We will ship the replacement product to you at our cost, and use every good measure to ensure that the replacement order is processed quickly. Replacement Terms We will send a product replacement for an authorized return following the completion of receiving and inspection at our facility. The replacement will ship within four business days following our receipt of your return (excluding weekends and national holidays). We do not send advance replacements or replacements before we receive and inspect the returned merchandise. To receive a replacement quicker, you may place a new order for the same item (shipping not included), and we will issue a refund for the full value of the returned product (including shipping), upon completion of our return process. Returning Items Please send us a message through eBay to receive an RMA number. You will be required to complete our product return form which will also provide helpful instructions for your return. All returned merchandise must be in original condition, and must include the original factory box (UPC bar codes and serial numbers must be intact) and factory packaging (e.g. foam, plastic, wrappings, etc.), peripherals (e.g. battery, charger, cords, straps, etc.), included warranty cards (without markings), and all instruction booklets and paperwork. The RMA number or any other inscriptions must not be written or printed on the product box or packaging. We will not process the return if any of these conditions are not followed. To locate the nearest shipping outlet, you may contact the following carriers: UPS FedEx USPS (Post Office) Remember, returned merchandise that is lost or damaged during transit is solely the shipper's responsibility (which is you when you return a product to us). It is important to save the tracking information and to properly insure all merchandise being returned to Sonic Electronix. Return Exceptions Although our return policy is quite flexible on most items, there are some exceptions, as written below: Any product not purchased from Sonic Electronix Any product without a valid, readable serial number, including but not limited to products with missing, damaged, altered, or otherwise unreadable serial number Any product that is returned without all original packaging and accessories, including the retail box, manuals, cables, and all other items originally included with the product Any product from which the UPC code has been removed from its packaging Any product that exhibits physical damage or abuse Any product for which you have submitted a mail-in rebate Products that are not eligible for return for any of the above reason(s) will be sent back to you at your cost and expense. Shipping Policies The default shipping rate and method listed are for residential or commercial destinations within the continental 48 United States (PO Boxes not included). Additional shipping fees are required for all other locations including, but not limited to: • PO Boxes, APO/FPO locations, Alaska, Hawaii, Puerto Rico, Guam, Canada and other countries outside the USA. We will make every attempt to process and ship all items within 2 business days of your cleared payment. Following order processing, please allow proper time for delivery. UPS Ground shipments arrive within 3-7 business days. To provide the most affordable rates, small items shipped via Standard Flat Rate Shipping or USPS First Class Mail ship via a joint effort by DHL and USPS and are delivered within 7-10 days from the date of shipment. We will update your eBay record with tracking information and send an e-mail confirming shipment. If 3 business days have passed since you sent payment and you do not receive an update through eBay or a tracking number via e-mail, please contact us immediately. International customers are responsible for any and all customs, import duties, brokerage fees, and taxes. They are not included in the item price or stated shipping charges. Payments Accepted PayPal is accepted for all customers. If you need checkout assistance, please contact us during our business hours through eBay or phone (Toll-free in USA: 1-877-289-7664 or Outside the USA 661-257-9993). Product Summary Manufacturer: NVX Model number: VAD8402 UPC: 818060019586 Weight: 8.00 lbs Internal SKU: vad8402 Internal Product ID: 158915 FAST SHIPPING SHIPS THE SAME DAY When Paid by 1:00 PM EST *restrictions apply, click for more info FREE SHIPPING ON MOST ORDERS *restrictions apply, click for more info EXPERIENCED • American Owned & Operated • In-House Product Experts • Selling on Ebay since 2000 • Internet Retailer Top 500 About Us Contact Us Payment Shipping Order Tracking Returns FAQ © 2000–2024 Sonic Electronix, Inc. - 724 S 11th St., Louisville, KY 40210 US All manufacturer names, model numbers, pictures and product descriptions are for the sole use of describing the product(s) for sale. All trademarks and trade names are the property of their respective trademark holders. Prices, specifications, and images are subject to change without notice. Free Shipping Information Close [X] Fast Shipping Information Close [X] Same day shipping for orders paid by Tuesday-Friday (Pay by 1:00PM EST) Orders paid by Saturday and Sunday will ship Monday. Orders paid on Monday will ship Monday or Tuesday.
Price: 179.99 USD
Location: Louisville, Kentucky
End Time: 2024-09-04T03:31:41.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Model: VAD8402
Modified Item: No
MPN: VAD8402
Custom Bundle: No
Brand: NVX
Type: Amplifier
Features: N/A
RMS Power: 840W
