Description: Sunlu New Filament PLA-Meta Combines the advantages of filament PLA and PLA+ 【High Speed Printing & No Clogging】Smooth Squeeze,PLA Meta is 1.5 times more fluid than regular PLA.The printing fluency is better than the existing PLA and PLA+, which greatly improves the printing success rate; It is more suitable for fast printing.【Avoid Knotting & No Odour】SUNLU has a professional production line with strict control of neatly lined up lines to avoid knots during printing.Completely mechanical wire winding and strict manual checks to ensure neat lines with few kinks, avoiding possible breaks.PLA Meta is a biological material, purified from corn grain, eco-friendly, odourless and harmless to humans. 【Impact Resistance & Energy Efficiency】High toughness and non-brittle PLA Meta printed parts can be sanded, drilled and painted.The PLA Meta filament is very tough and not easily brittle, the model does not break easily when dropped from a height to the ground.PLA Meta printing temperature: 180-200℃,low printing temperature printing for greater energy efficiency. 【Glossy Surface & Good Adhesion】Soft and warm coloured PLA Meta filaments bring glossy surface prints to arts, crafts and 3D projects.PLA Meta has the advantages of high purity with good adhesion and superb layer bonding. Wire diameter Tolerance Printing temperature Bottom plate temperature Rally (KGF) Melt index Water absorption% Elongation at break Printing speed Air bubbles Net weight Length 1.75 mm ±0.02MM 180-200℃ Glue is required when not heated. Glue is not required when heat to 50-65℃ 9-12 8-12g/10min (190℃, 2.16Kg) 0.5% 35 % 50-100MM/s zero bubbles 1KG 330m Sunlu Regular Filament Introduction: 【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, making it suitable for almost all 1.75mm FDM 3D printers. Environmentally friendly and non-toxic. Suitable for most FDM 3D Printer & 3D Pen. Features Print Temp Hot Bed Temp PLA-Matte(1KG) 1. Environmentally friendly, non-toxic, and biodegradable; 2. Printing without odor; 3.The surface is matte and has a good texture; 4. Low shrinkage rate; 205-215℃ 1. Apply glue when not heating 2. No need to apply glue when heating 50-65 ℃ PLA(1KG) Low shrinkage; High strength and rigidity; Suitable for printing handicrafts, artworks and industrial design samples. 200-230℃ Marble(1KG) Close to the effect of marble. Carbon Fiber(1KG) Fiber materials with high strength and modulus; High rigidity, low density, light weight and other advantages; Electrostatic dissipation; It is suitable for printing thin, hollow models and model products with stiffness texture requirements. WOOD(1KG) Close to solid wood effect; It is suitable for printing models with wood effect, with wood powder content. The wood is lifelike, and the surface can be finely processed. 170-190℃ PLA+(1KG) Toughness is not easy to be brittle; 10 times more flexible than PLA in the market; The printing is smooth, and the finished product surface is more smooth and delicate; It is suitable for printing handicrafts, artworks, industrial design samples and product models with higher toughness requirements. 210-235℃ 1. Apply glue when not heating 2. No need to apply glue when heating 55-65 ℃ SILK(1KG) Close to silk effect; It is 50 times more flexible than PLA in the market; The printing is smooth, and the finished product surface is more smooth and delicate; 200-230℃ 1. Apply glue when not heating 2. No need to apply glue when heating 60-80 ℃ PETG(1KG) Good toughness, good impact strength, good acid and alkaline resistance, excellent toughness, weather resistance, good adhesion; Good dimensional stability, without cracks and warpage; High transparency and good luster; Suitable for printing all kinds of commonly used models, handicrafts, industrial pieces, advertising words, etc. 220-250℃ 1. Apply glue when not heating 2. No need to apply glue when heating 75-85 ℃ ABS(1KG) Excellent impact strength and wear resistance; Chemical resistance, dyeability, good molding and machining effects; The support is easy to peel off; It is applicable to equipment with heating device on the base plate. It can print models that require strong printing strength and require subsequent processing, such as dyeing, polishing, electroplating, etc. It is suitable for printing small parts. 240-270℃ 80-120℃ TPU(0.5KG) Bright color, high resilience, new and upgraded high liquidity; The material is soft and has good extensibility; Good aging resistance; Suitable for printing children's toys, shoes, medical supplies and other products with good extensibility. 205-230℃ No need to heat 3D Filament Storage Tips: We recommended storing filament in a sealed plastic bag or box after each print (a large ziplock or Tupperware works well). In extreme cases where the filament gets damp, you can bake it in an oven with 50-degree Celsius for about an hour to restore its dryness. Each time after use of your 3D Printer Filament. Be sure to insert the free end of the filament into the hole to avoid the filament being tangled for next time use. Contact us The best way to contact us is by eBay messages.We always reply eBay messages that are sent to us with an inquiry, usually within 24 hours of receipt or sooner. We will answer all eBay messages during our business hours. (Monday - Friday 9:00 am to 6:00 pm HKT except all Holidays)Please do not leave any low detailed seller ratings, neutral or negative feedback before contacting us.We commit you 100% satisfaction guarantee. Feedback 1. We will appreciate a positive feedback with all 5 star rating when you are satisfied. 2. Our goal is to make sure you are a happy buyer and have a pleasant shopping experience with us. 3. Please email us before leaving any 1 or 2 ratings, negative feedback or open any dispute. 4. We understand the concerns and frustrations that occasionally occur, and appreciate the opportunity to assist you in resolving any problem associated with your purchases. On Jun 12, 2023 at 20:19:44 PDT, seller added the following information:
Price: 10.78 USD
Location: Los Angeles, California
End Time: 2023-09-03T07:35:50.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Return policy details:
Country/Region of Manufacture: China
MPN: PLA/PLA+/ABS/PETG/TPU/SILK
Brand: SUNLU
Manufacturer Warranty: 1 year
California Prop 65 Warning: Product packaging and material may contain more and/or different information from the website, including the product description, country of origin, nutrition, ingredient, allergen and other information. Always read labels, warnings, and directions and other information provided with the product before using or consuming a product. Information and statements regarding dietary supplements have not been evaluated by the Food and Drug Administration and are not intended to diagnose, treat, cure, or prevent any disease or health condition. Electronic devices may be subject to the Federal Communications Commission's testing, equipment authorization, and device marking and labeling requirements. For additional information about a product, please contact the manufacturer.
Type: Filament
Compatible Model: For 3D Systems CubePro, For 3D Systems ProJet 1200, For Airwolf 3D AXIOM, For Airwolf 3D AXIOM Dual Extruder, For Airwolf 3D AXIOMe, For Anet A8, For BEEVERYCREATIVE BEETHEFIRST, For BEEVERYCREATIVE BEEINSCHOOL, For B9Creations B9Creator, For BEEVERYCREATIVE BEETHEFIRST+, For BQ Hephestos 2, For BQ Hephestos, For BQ Witbox 2, For BQ Witbox, For CEL Robox, For CraftUnique CraftBot, For CraftUnique CraftBot 2, For CraftUnique CraftBot Plus, For Creality 3D CR-10, For Dremel 3D20 Idea Builder, For Dremel 3D20 Idea Builder for Education, For Dremel 3D40 Idea Builder, For Dremel 3D40 Idea Builder for Education
Filament Diameter: 1.75 mm
Unit Quantity: 2.2
Unit Type: lb
Available Variations
Color: PLA
Price: 19.78 USD
Available Quantity: 43
Quantity Sold: 13
Color: PLA
Price: 18.94 USD
Available Quantity: 60
Quantity Sold: 20
Color: Petg
Price: 17.66 USD
Available Quantity: 73
Quantity Sold: 27
Color: PLA
Price: 19.78 USD
Available Quantity: 29
Quantity Sold: 4
Color: PLA+SILK
Price: 20.61 USD
Available Quantity: 35
Quantity Sold: 5
Color: PLA+SILK
Price: 19.7 USD
Available Quantity: 2
Quantity Sold: 2
Color: PLA+SILK
Price: 20.61 USD
Available Quantity: 2
Quantity Sold: 2
Color: PLA+SILK
Price: 20.61 USD
Available Quantity: 10
Quantity Sold: 5
Color: PLA+SILK
Price: 23.22 USD
Available Quantity: 4
Quantity Sold: 4
Color: PLA+SILK
Price: 20.61 USD
Available Quantity: 32
Quantity Sold: 2
Color: PLA+SILK
Price: 19.7 USD
Available Quantity: 43
Quantity Sold: 4
Color: PLA+
Price: 20.79 USD
Available Quantity: 39
Quantity Sold: 10
Color: Petg
Price: 17.66 USD
Available Quantity: 64
Quantity Sold: 14
Color: Petg
Price: 18.37 USD
Available Quantity: 56
Quantity Sold: 6
Color: Petg
Price: 18.37 USD
Available Quantity: 36
Quantity Sold: 6
Color: PLA
Price: 18.94 USD
Available Quantity: 52
Quantity Sold: 22
Color: PLA
Price: 22.4 USD
Available Quantity: 8
Quantity Sold: 8
Color: PLA
Price: 19.78 USD
Available Quantity: 31
Quantity Sold: 6
Color: PLA
Price: 19.78 USD
Available Quantity: 53
Quantity Sold: 13
Color: ABS
Price: 17.66 USD
Available Quantity: 17
Quantity Sold: 17
Color: PLA
Price: 19.78 USD
Available Quantity: 28
Quantity Sold: 3
Color: PLA+
Price: 20.41 USD
Available Quantity: 49
Quantity Sold: 20
Color: PLA+
Price: 20.41 USD
Available Quantity: 33
Quantity Sold: 3
Color: PLA+
Price: 20.41 USD
Available Quantity: 36
Quantity Sold: 6
Color: PLA+
Price: 20.41 USD
Available Quantity: 31
Quantity Sold: 1
Color: ABS
Price: 17.66 USD
Available Quantity: 45
Quantity Sold: 5
Color: PLA
Price: 20.37 USD
Available Quantity: 2
Quantity Sold: 2
Color: PLA
Price: 20.37 USD
Available Quantity: 2
Quantity Sold: 2
Color: PLA-Meta
Price: 20.61 USD
Available Quantity: 0
Quantity Sold: 0
Color: PLA-Meta
Price: 20.61 USD
Available Quantity: 0
Quantity Sold: 0
Color: PLA-Meta
Price: 20.61 USD
Available Quantity: 1
Quantity Sold: 1
Color: PLA-Meta
Price: 20.61 USD
Available Quantity: 30
Quantity Sold: 0
Color: PLA-Meta
Price: 20.61 USD
Available Quantity: 30
Quantity Sold: 0
Color: TPU
Price: 17.65 USD
Available Quantity: 49
Quantity Sold: 10
Color: TPU
Price: 17.65 USD
Available Quantity: 5
Quantity Sold: 5
Color: PLA-Meta
Price: 19.7 USD
Available Quantity: 2
Quantity Sold: 2
Color: PLA-Meta
Price: 19.7 USD
Available Quantity: 2
Quantity Sold: 2
Color: PLA-Meta
Price: 20.61 USD
Available Quantity: 2
Quantity Sold: 2
Color: PLA-Meta 250g
Price: 10.78 USD
Available Quantity: 4
Quantity Sold: 1
Color: PLA+
Price: 19.51 USD
Available Quantity: 72
Quantity Sold: 22
Color: PLA+
Price: 19.51 USD
Available Quantity: 52
Quantity Sold: 4
Color: PLA+
Price: 20.41 USD
Available Quantity: 44
Quantity Sold: 4
Color: PLA+
Price: 20.41 USD
Available Quantity: 36
Quantity Sold: 7
Color: PLA WOOD
Price: 25.25 USD
Available Quantity: 1
Quantity Sold: 1
Color: PLA Carbon Fiber
Price: 29.72 USD
Available Quantity: 51
Quantity Sold: 1
Color: PLA+SILK
Price: 20.61 USD
Available Quantity: 30
Quantity Sold: 0
Color: Petg
Price: 18.37 USD
Available Quantity: 30
Quantity Sold: 0
Color: PLA
Price: 19.78 USD
Available Quantity: 6
Quantity Sold: 1
Color: Petg
Price: 18.37 USD
Available Quantity: 2
Quantity Sold: 2
Color: PLA Marble
Price: 22.4 USD
Available Quantity: 37
Quantity Sold: 2
Color: PLA+
Price: 20.41 USD
Available Quantity: 30
Quantity Sold: 1
Color: PLA+
Price: 20.41 USD
Available Quantity: 30
Quantity Sold: 1
Color: PLA+
Price: 20.41 USD
Available Quantity: 30
Quantity Sold: 1
Color: PLA+
Price: 20.41 USD
Available Quantity: 30
Quantity Sold: 0
Color: PLA+
Price: 20.41 USD
Available Quantity: 30
Quantity Sold: 5
Color: PLA+
Price: 20.41 USD
Available Quantity: 30
Quantity Sold: 0
Color: PLA+
Price: 20.41 USD
Available Quantity: 30
Quantity Sold: 1
Color: PLA
Price: 19.78 USD
Available Quantity: 30
Quantity Sold: 0
Color: PLA+
Price: 20.41 USD
Available Quantity: 30
Quantity Sold: 0
Color: Matte PLA
Price: 18.94 USD
Available Quantity: 50
Quantity Sold: 0
Color: Matte PLA
Price: 18.94 USD
Available Quantity: 50
Quantity Sold: 0
Color: Matte PLA
Price: 19.81 USD
Available Quantity: 50
Quantity Sold: 0
Color: Matte PLA
Price: 19.81 USD
Available Quantity: 25
Quantity Sold: 0
Color: Matte PLA
Price: 19.81 USD
Available Quantity: 25
Quantity Sold: 0
Color: Matte PLA
Price: 19.81 USD
Available Quantity: 25
Quantity Sold: 0
Color: Matte PLA
Price: 19.81 USD
Available Quantity: 25
Quantity Sold: 0
Color: Petg
Price: 18.37 USD
Available Quantity: 0
Quantity Sold: 0
